Laser level generally need to pay attention to what the requirements?
1, install the battery: Please use lithium batteries or high-performance alkaline batteries
2, coarse leveling: By rotating the three legs on the base, adjust to the top of the instrument blisters online (you do not have to be very accurate), and then the instrument will automatically leveling
3, turn on the right-hand turn on the power / lock switch, at this time on the location of lit, blinking light blinking instructions
4, Operation: According to the actual situation, according to the V / H key on the top of the cabinet (V represents the vertical line, H represents the horizontal line) to achieve the light combination you need. To align vertically to a position, manually turn the instrument, with fine-tuning, so that the light is precisely aligned with the target. To raise or lower the horizontal line, use a tripod to move the position of the horizontal line
5, the alarm: If the instrument is not flat, the laser line will be blinking, at this time only three feet to adjust the legs, as long as the light does not flash
6, outdoor: If the outdoor operation, the light is not easy to see, can be equipped with a receiver, press the instrument on the OUTDOOR, blisters under the light tube will flash, the representative can receive, then move the receiver in the distance, such as finding light, The middle of the blue light will be bright, then the receiver edge of a groove on behalf of the actual position of the light, such as the red light above, on behalf of the light side up, move the receiver up, on the contrary under the light to move the receiver down to blue light prevail , You can also open the receiver buzzer, the buzzer sounds to judge
7, off: turn off the switch just turn the switch to the OFF state, the instrument automatically locks and cut off the power
|